If your hot water system has stopped working, or you're planning ahead for when it eventually does, cost is usually the first question. The answer depends on a few things: the type of system, the size of your household, and whether it's a straightforward like-for-like swap or a bigger change, such as moving from gas to electric or upgrading to a heat pump.
This guide breaks down what installation and replacement typically cost in Adelaide, what affects the price, and what to consider before you decide.
Hot Water System Cost in Adelaide by Type
| System Type | Typical Installed Cost |
|---|---|
| Electric storage | $900 – $2,500 |
| Gas storage | $1,300 – $3,000 |
| Continuous flow gas | $1,500 – $2,800 |
| Heat pump (before rebates) | $2,800 – $5,500 |
| Solar hot water | $3,200 – $7,000 |
These figures are general guidance only. Your exact cost will depend on your property, existing setup and system size. Speak to our team for an accurate, obligation-free quote.
What Affects the Cost of Installation or Replacement
System type and size
Larger households generally need a larger tank or higher-capacity continuous flow unit, which increases the cost of the unit itself.
Like-for-like vs system change
Replacing an existing system with the same type (e.g. electric storage to a newer electric storage system) is typically the most straightforward and cost-effective option. Switching energy sources, such as gas to electric or standard electric to heat pump, can involve additional electrical or gas work.
Access and location
Systems installed in easy-to-access locations are generally quicker and cheaper to install than those in tight roof spaces, under-house areas or awkward outdoor positions.
Electrical or gas work required
Heat pump systems and some upgrades may require additional electrical work. Gas systems may require compliant gas fitting depending on the age of the existing setup.
Removal and disposal of the old unit
Removing and properly disposing of an old hot water system is usually included as part of a replacement job.

Are There Rebates Available for Heat Pump Hot Water Systems in South Australia?
South Australia's Retailer Energy Productivity Scheme (REPS) is a state government initiative that runs through energy retailers rather than as a fixed government rebate, with retailers choosing to offer incentives such as free or reduced-price efficient products to eligible households and businesses.
That means the exact incentive available depends on your energy retailer and eligibility, rather than a flat rebate amount everyone receives.
Heat pump systems may also be eligible for federal incentives under the Small-scale Renewable Energy Scheme, which can further reduce the upfront cost.
Because rebate eligibility and amounts vary by household and retailer, we recommend checking your eligibility directly at energy.sa.gov.au or asking our team when we quote your job, so you know exactly what applies to your situation.
Key Signs Your Hot Water System Needs Replacing
- No hot water, or hot water that runs out quickly
- Rusty or discoloured water coming from hot taps
- Visible rust or corrosion on the tank itself
- Water pooling around the base of the unit
- Unusual banging or rumbling noises from the tank
- A system that is approaching or past its expected lifespan
If you're noticing any of these signs, it's worth having your system assessed before it fails completely, particularly if it's an older unit.
Why Choose Level Plumbing Adelaide CBD for Your Hot Water System
There are standard plumbing services. Then there's Level.
- $0 callout fee for your initial assessment and quote
- Upfront pricing before any work begins, no surprises
- 12-month workmanship guarantee on installation
- Plumb Now, Pay Later payment options available
- Certified Master Plumbers, fully licensed for gas and electric systems
If your hot water system has failed unexpectedly and you need an urgent replacement, get in touch, and we'll talk you through your options.